Thursday, February 23, 2012

How does the door panel come off to replace the driver's side mirror of my honda civic 2004?

I bought a replacement mirror for the drivers side of my honda civic 2004 and i know that i need to take the panel off the inside but i obviously don't want to break it...do I just pry it off, are there connectors that I need to locate? Please help, thanks!How does the door panel come off to replace the driver's side mirror of my honda civic 2004?You should buy or make a window w handle release tool and buy a door panel removal tool You will need to remove the screws from behind the door handle pocket and under the armrest and look for any others. If you have manual windows you can make a crank release tool out of a bent coat hanger. Cut it to about 15 inches and put a 90o bend on one end then push the plastic washer back and turn the crank till you see the horseshoe part of the clip facing upward then insert the tool and pull the clip up till it comes off. Snap the clip back onto the handle to prevent loss. Double check for any screws then using a panel removal tool gently pry the door panel back then insert a pencil into the gap and locate the clips then gently remove them by pry with the toolHow does the door panel come off to replace the driver's side mirror of my honda civic 2004?Look below at some of the other answers on this issue

No comments:

Post a Comment